Publications @ ALPS

2016

Usala, John D., Maag, Adrian, Nelis, Thomas, & Gamez, Gerardo, (2016). Compressed sensing spectral imaging for plasma optical emission spectroscopy. Journal of Analytical Atomic Spectrometry, , , DOI: 10.1039/C6JA00261G

2015

Zimmermann, M., Jaeggi, B., & Neuenschwander, B., (2015). Improvements in ultra-high precision surface structuring using synchronized galvo or polygon scanner with a laser system in MOPA arrangement. Proceedings of the SPIE, 9350, 935016 (8 pp.)-935016 (8 pp.), DOI: 10.1117/12.2076724

Nicolet, M. A., Ryser, M., & Romano, V., (2015). Electrical resistivity change in amorphous Ta42Si13N45 films by stress relaxation. Applied Physics a-Materials Science & Processing, 118, 1153-1160, DOI: 10.1007/s00339-014-8931-0

Neuenschwander, B., Kramer, T., Lauer, B., & Jaeggi, B., (2015). Burst mode with ps- and fs-pulses: influence on the removal rate, surface quality, and heat accumulation. Proceedings of the SPIE, 9350, 93500U (14 pp.)-93500U (14 pp.), DOI: 10.1117/12.2076455

Cam, P., Neuenschwander, B., Schwaller, P., Kohli, B., Luscher, B., Senn, F., Kounga, A., & Appert, C., (2015). A novel laser-based method for controlled crystallization in dental prosthesis materials. Proceedings of the SPIE - Progress in Biomedical Optics and Imaging, 9306, 930607 (6 pp.)-930607 (6 pp.), DOI: 10.1117/12.2076567

Binetti, S., Le Donne, A., Rolfi, A., Grilli, E., Jaggi, B., Neuenschwander, B., Busto, C., Scorticati, D., Longoni, L., & Pellegrino, S., (2015). Random surface texturing of mc-Silicon for solar cells with picosecond lasers; a comparison between 1064 nm, 532 nm and 355 nm laser emission wavelengths. 2015 Conference on Lasers and Electro-Optics (CLEO). Proceedings, , 2 pp.-2 pp., DOI:

Zehnder, Sarah, Lorenz, Pierre, Ehrhardt, Martin, Zimmer, Klaus, & Schwaller, Patrick, (2014). Laser-induced processes on the back side of dielectric surfaces using a CuSO4-based absorber liquid. Laser-Based Micro- and Nanoprocessing Viii, 8968, , DOI: 10.1117/12.2037629

Romano, Valerio, Pilz, Soenke, & Etissa, Dereje, (2014). Sol-gel-based doped granulated silica for the rapid production of optical fibers. International Journal of Modern Physics B, 28, , DOI: 10.1142/s0217979214420107

2014

Pimenov, Sergei M., Neuenschwander, Beat, Jaeggi, Beat, & Romano, Valerio, (2014). Effect of crystal orientation on picosecond-laser bulk microstructuring and Raman lasing in diamond. Applied Physics a-Materials Science & Processing, 114, 1309-1319, DOI: 10.1007/s00339-013-7953-3

Pimenov, Sergei M., Khomich, Andrey A., Vlasov, Igor I., Zavedeev, Evgeny V., Khomich, Alexander V., Neuenschwander, Beat, Jaeggi, Beat, & Romano, Valerio, (2014). Metastable carbon allotropes in picosecond-laser-modified diamond. Applied Physics a-Materials Science & Processing, 116, 545-554, DOI: 10.1007/s00339-014-8530-0

Neuenschwander, B., Jaeggi, B., Zimmermann, M., Penning, L., & de Loor, R., (2014). High throughput laser processing with ultra-short pulses by high speed line-scanning in synchronized mode. 2014 Conference on Lasers and Electro-Optics (CLEO) - Laser Science to Photonic Applications, , 2 pp.-2 pp., DOI:

Neuenschwander, B., Jaeggi, B., Romano, V., & Pimenov, S. M., (2014). Picosecond-laser bulk modification, luminescence and Raman lasing in single-crystal diamond. Laser Applications in Microelectronic and Optoelectronic Manufacturing (Lamom) Xix, 8967, , DOI: 10.1117/12.2040545

Najafi, H., Etissa, D., & Romano, V., (2014). Insights into microstructure and chemistry of active fiber core material produced by the granulated silica method. Micro-Structured and Specialty Optical Fibres Iii, 9128, , DOI: 10.1117/12.2056394

Lorenz, Pierre, Zehnder, Sarah, Ehrhardt, Martin, Frost, Frank, Zimmer, Klaus, & Schwaller, Patrick, (2014). Nanosecond laser-induced back side wet etching of fused silica with a copper-based absorber liquid. Laser Applications in Microelectronic and Optoelectronic Manufacturing (Lamom) Xix, 8967, , DOI: 10.1117/12.2037614

Jaeggi, B., Neuenschwander, B., Zimmermann, M., Penning, L., deLoor, R., Weingarten, K., & Oehler, A., (2014). High Throughput and High Precision Laser Micromachining with ps-Pulses in Synchronized Mode with a fast Polygon Line Scanner. Laser Applications in Microelectronic and Optoelectronic Manufacturing (Lamom) Xix, 8967, , DOI: 10.1117/12.2037379

Hennig, G., Baldermann, T., Nussbaum, C., Neuenschwander, B., & Bruning, S., (2014). Ultrafast beam modulation and delivery for embossing and digital printing applications. 2014 Conference on Lasers and Electro-Optics (CLEO) - Laser Science to Photonic Applications, , 2 pp.-2 pp., DOI:

Chapelle, A., El Younsi, I., Vitale, S., Thimont, Y., Nelis, Th, Presmanes, L., Barnabe, A., & Tailhades, Ph, (2014). Improved semiconducting CuO/CuFe2O4 nanostructured thin films for CO2 gas sensing. Sensors and Actuators B-Chemical, 204, 407-413, DOI: 10.1016/j.snb.2014.07.088

Burn, Andreas, Muralt, Martin, Witte, Reiner, Buecheler, Stephan, Nishiwaki, Shiro, Krainer, Lukas, Spuehler, Gabriel J., & Romano, Valerio, (2014). Optimized laser patterning for high performance Cu(In,Ga)Se-2 thin-film solar modules. Laser Applications in Microelectronic and Optoelectronic Manufacturing (Lamom) Xix, 8967, , DOI: 10.1117/12.2039630

Valledor, Rebeca, Vega, Paola, Pisonero, Jorge, Nelis, Thomas, & Bordel, Nerea, (2013). Further insights into prepeak emission in pulsed radiofrequency glow discharge. Spectrochimica Acta Part B-Atomic Spectroscopy, 85, 45-54, DOI: 10.1016/j.sab.2013.04.002

2013

Schmid, Marc, Zehnder, Sarah, Schwaller, Patrick, Neuenschwander, Beat, Zuercher, Joseph, & Hunziker, Urs, (2013). Measuring the complex refractive index of metals in the solid and liquid state and its influence on the laser machining. Laser Applications in Microelectronic and Optoelectronic Manufacturing (Lamom) Xviii, 8607, , DOI: 10.1117/12.2003744

Neuenschwander, B., Jaeggi, B., Schmid, M., Dommann, A., Neels, A., Bandi, T., & Hennig, G., (2013). Factors controlling the incubation in the application of ps laser pulses on copper and iron surfaces. Laser Applications in Microelectronic and Optoelectronic Manufacturing (Lamom) Xviii, 8607, , DOI: 10.1117/12.2004136

Neuenschwander, B., Jaeggi, B., & Schmid, M., (2013). From fs to sub-ns: Dependence of the material removal rate on the pulse duration for metals. Lasers in Manufacturing (Lim 2013), 41, 787-794, DOI: 10.1016/j.phpro.2013.03.150

Jaeggi, B., Neuenschwander, B., Meier, T., Zimmermann, M., & Hennig, G., (2013). High throughput laser micro machining on a rotating cylinder with ultra short pulses at highest precision. Laser Applications in Microelectronic and Optoelectronic Manufacturing (Lamom) Xviii, 8607, , DOI: 10.1117/12.2004099

Jaeggi, B., Neuenschwander, B., Meier, T., Zimmermann, M., & Hennig, G., (2013). High precision surface structuring with ultra-short laser pulses and synchronized mechanical axes. Lasers in Manufacturing (Lim 2013), 41, 319-326, DOI: 10.1016/j.phpro.2013.03.084

Burn, A., Muralt, M., Pilz, S., Romano, V., Witte, R., Frei, B., Buecheler, S., Nishiwaki, S., & Krainer, L., (2013). All fiber laser scribing of Cu(In,Ga)Se-2 thin-film solar modules. Lasers in Manufacturing (Lim 2013), 41, 706-715, DOI: 10.1016/j.phpro.2013.03.138

2012

Valledor, Rebeca, Pisonero, Jorge, Nelis, Thomas, & Bordel, Nerea, (2012). Spatial emission distribution of a pulsed radiofrequency glow discharge: Influence of the pulse frequency. Spectrochimica Acta Part B-Atomic Spectroscopy, 68, 24-33, DOI: 10.1016/j.sab.2012.01.008

Semenov, A. V., Lopin, A. V., Puzikov, V. M., Vovk, O. M., Dmitruk, I. N., & Romano, V., (2012). Effect of high-temperature annealing on the optical and photoluminescence properties of nanocrystalline SiC films. Thin Solid Films, 520, 6626-6630, DOI: 10.1016/j.tsf.2012.07.005

Orejas, Jaime, Pisonero, Jorge, Bordel, Nerea, Nelis, Thomas, Guillot, Philippe, & Sanz-Medel, Alfredo, (2012). Bidimensional characterization of the emission spectra in a direct current atmospheric pressure glow discharge. Spectrochimica Acta Part B-Atomic Spectroscopy, 76, 166-174, DOI: 10.1016/j.sab.2012.06.044

Neuenschwander, Beat, Jaeggi, Beat, Schmid, Marc, Rouffiange, Vincent, & Martin, Paul- E., (2012). Optimization of the volume ablation rate for metals at different laser pulse-durations from ps to fs. Laser Applications in Microelectronic and Optoelectronic Manufacturing (Lamom) Xvii, 8243, , DOI: 10.1117/12.908583

Filliger, R., Mermoud, O., Trivun, D., & Walther, P., (2012). 3D anisotropy measurement methodology for surface microstructures. Surface and Interface Analysis, 44, 1547-1557, DOI: 10.1002/sia.5057

Burn, Andreas, Romano, Valerio, Muralt, Martin, Witte, Reiner, Frei, Bruno, Buecheler, Stephan, & Nishiwaki, Shiro, (2012). Selective ablation of thin films in latest generation CIGS solar cells with picosecond pulses. Laser Applications in Microelectronic and Optoelectronic Manufacturing (Lamom) Xvii, 8243, , DOI: 10.1117/12.906919

2011

Zehnder, S., Schwaller, P., von Arx, U., Bucher, G., & Neuenschwander, B., (2011). Micro structuring of transparent materials with NIR ns-laser pulses. Lasers in Manufacturing 2011: Proceedings of the Sixth International Wlt Conference on Lasers in Manufacturing, Vol 12, Pt B, 12, 195-200, DOI: 10.1016/j.phpro.2011.03.122

Schwaller, P., Zehnder, S., von Arx, U., & Neuenschwander, B., (2011). A novel Model for the Mechanism of Laser-Induced Back Side Wet Etching in Aqueous Cu Solutions using ns Pulses at 1064 nm. Lasers in Manufacturing 2011: Proceedings of the Sixth International Wlt Conference on Lasers in Manufacturing, Vol 12, Pt B, 12, 188-194, DOI: 10.1016/j.phpro.2011.03.121

Schmid, Marc, Neuenschwander, Beat, Romano, Valerio, Jaeggi, Beat, & Hunziker, Urs W., (2011). Processing of metals with ps-laser pulses in the range between 10ps and 100ps. Laser Applications in Microelectronic and Optoelectronic Manufacturing (Lamom) Xvi, 7920, , DOI: 10.1117/12.879498

Romano, V., Meier, M., Theodore, N. D., Marble, D. K., & Nicolet, M. A., (2011). Irradiation of amorphous Ta42Si13N45 film with a femtosecond laser pulse. Applied Physics a-Materials Science & Processing, 104, 357-364, DOI: 10.1007/s00339-010-6149-3

Pimenov, Sergei M., Vlasov, Igor I., Khomich, Andrey A., Neuenschwander, Beat, Muralt, Martin, & Romano, Valerio, (2011). Picosecond-laser-induced structural modifications in the bulk of single-crystal diamond. Applied Physics a-Materials Science & Processing, 105, 673-677, DOI: 10.1007/s00339-011-6645-0

Jaeggi, B., Neuenschwander, B., Schmid, M., Muralt, M., Zuercher, J., & Hunziker, U., (2011). Influence of the Pulse Duration in the ps-Regime on the Ablation Efficiency of Metals. Lasers in Manufacturing 2011: Proceedings of the Sixth International Wlt Conference on Lasers in Manufacturing, Vol 12, Pt B, 12, 164-171, DOI: 10.1016/j.phpro.2011.03.118

Hennig, G., Resing, M., Mattheus, S., Neuenschwander, B., & Bruning, S., (2011). Laser Microstructuring and Processing in Printing Industry. CLEO: 2011 - Laser Science to Photonic Applications, , 3 pp.-3 pp., DOI:

2010 and before

Neuenschwander, Beat, Bucher, Guido F., Nussbaum, Christian, Joss, Benjamin, Muralt, Martin, Hunziker, Urs W., & Schuetz, Peter, (2010). Processing of metals and dielectric materials with ps-laserpulses: results, strategies, limitations and needs. Laser Applications in Microelectronic and Optoelectronic Manufacturing Xv, 7584, , DOI: 10.1117/12.846521

Kucher, N., Held, M., Schwaller, P., & Vogel, R., (2010). Novel electric impedance technology system for detecting absent neointimal coverage of a stent. European Heart Journal, 31, 792-792, DOI:

Simmen, F., Lippert, T., Novak, P., Neuenschwander, B., Doebeli, M., Mallepell, M., & Wokaun, A., (2009). Influence of the substrate material on the properties of pulsed laser deposited thin Li1+xMn2O4-delta films. Applied Surface Science, 255, 5303-5306, DOI: 10.1016/j.apsusc.2008.08.016

Simmen, F., Lippert, T., Novak, P., Neuenschwander, B., Doebeli, M., Mallepell, M., & Wokaun, A., (2008). The influence of lithium excess in the target on the properties and compositions of Li1+xMn2O4-delta thin films prepared by PLD. Applied Physics a-Materials Science & Processing, 93, 711-716, DOI: 10.1007/s00339-008-4701-1